What are the interfaces and structures of fiber adapters
Fiber Optic Adapter Definition Fiber optic adapters, also known as flanges or fiber optic connectors, are primarily used to connect two fiber optic connectors in a fiber cabling system, and are often assembled on various adapter panels and chassis. Important fiber optic connection components are widely used in television networks, local area networks, video transmission, optical fiber communication systems, and FTTH fiber optic homes. Conventional fiber optic adapters are available in flanged and non-flanged versions, where the fiber optic adapter without a flange can be snapped directly onto a panel or tray, and the fiber optic adapter with the flange needs to be screwed. Fiber Optic Adapter Interface Type According to the diversity of fiber optic connectors, there are many types of interfaces for fiber optic adapters, as shown in the figure below. According to the same connector at both ends of the fiber adapter, its interface can be divided into six types: LC-LC, SC-SC, ST-ST, FC-FC, MPO-MPO, and E2000-E2000. According to different connectors at both ends of the fiber adapter, its interfaces can be divided into six types: LC-SC, LC-ST, LC-FC, SC-FT, SC-FC, and FC-ST. These two ends have different connections. The adapter for the device is often referred to as a hybrid adapter. In addition, the fiber adapters of the SC and FC interfaces are relatively more widely used in all types of interfaces.
