New Coronary Pneumonia Prevention and Control Technical Solution for Medical Institutions
1. Basic requirements
(1) Formulate emergency plans and work processes. Medical institutions should establish an early warning mechanism, formulate emergency plans and work processes based on the etiological characteristics of the new coronavirus, combined with the source of infection, transmission route, susceptible population, and conditions for diagnosis and treatment.
(2) Carry out training for all staff. Determine the training content for different personnel according to job responsibilities, so that they are proficient in the knowledge, methods and skills of the prevention and control of new coronavirus infection, and achieve early detection, early reporting, early isolation, early diagnosis, early treatment and early control.
(3) Protect medical personnel. Medical institutions shall standardize the work of disinfection, isolation and protection, reserve qualified quality and sufficient quantities of protective materials, and ensure that medical personnel have personal protection in place. On the basis of strict implementation of standard prevention, strengthen infection prevention and control of contact transmission, droplet transmission and air transmission.
(4) Pay attention to the health of medical personnel. Medical institutions should allocate human resources and shift arrangements reasonably to avoid overwork of medical personnel. Carry out active health monitoring based on job characteristics and risk assessment results. Various measures have been taken to ensure that medical personnel provide health services to patients in a healthy manner.
(5) Strengthen infection monitoring. Do a good job of early warning and forecast, strengthen the supervision and guidance of infection prevention and control, find hidden dangers, and improve in time. When a pneumonia patient suspected or diagnosed with a new coronavirus infection is found, it should report in time according to the relevant requirements, and report the information within 2 hours, and do the corresponding disposal work.
(6) Do a good job in cleaning and disinfection management. According to the "Hospital Air Purification Management Standards", the ventilation of the diagnosis and treatment environment is strengthened. Conditional medical institutions can carry out air disinfection, and can also be equipped with circulating air disinfection equipment. Strictly implement the "Technical Standards for Disinfection of Medical Institutions", do a good job of cleaning and disinfecting the diagnosis and treatment environment, medical equipment, patient materials, etc., strictly deal with the patients' respiratory secretions, excreta, and vomit, and strictly end disinfection.
(7) Strengthen the management of patient visits. Medical institutions should do a good job in managing patients, and try to reduce the crowding of patients to reduce the risk of hospital infection. When a patient suspected or confirmed to be infected with the new coronavirus is found, isolation or control transmission measures are taken according to law, and medical observation and other necessary preventive measures are taken for the patient's accompanying personnel and other close contacts according to the regulations. If they do not have the ability to treat, refer the patient to a medical institution with the ability to treat in time.
(8) Strengthen patient education. Medical institutions should actively carry out education of patients and their accompanying staff to make them aware of the protection of new coronavirus, and guide them to wash their hands correctly, cough etiquette, medical observation and home isolation.
(9) Strengthen the management of infection outbreaks. Strictly implement the rules and regulations of infection prevention and control in medical institutions to minimize the risk of infection outbreaks. To enhance the sensitivity, once a suspected outbreak or outbreak of a new coronavirus infection occurs, the medical institution must report in time in accordance with the regulations, and in accordance with relevant standards and procedures, initiate an emergency plan and cooperate with the investigation and disposal work.
(10) Strengthen the management of medical waste. Incorporate the medical waste generated by the new coronavirus infection from the diagnosed or suspected patients into the management of infectious medical waste, and strictly follow the relevant regulations of the “Medical Waste Management Regulations” and “Medical Waste Management Measures for Medical Wastes” for standard disposal.
2. Management of key departments
(1) fever clinic.
1. The layout and working process of the fever clinic should meet the relevant requirements of the "Hospital Isolation Technical Specification".
2. Strengthen the ventilation in the observation room or rescue room; if mechanical ventilation is used, the direction of the air flow should be controlled from the clean side to the polluted side.
3. Equipped with adequate medical personnel protective equipment that meets the requirements, and hand hygiene facilities such as quick-drying hand disinfectants should be provided at the entrance and exit of fever clinics.
4. Medical staff should carry out standard prevention when carrying out diagnosis and treatment. To wear medical surgical masks or medical protective masks correctly, hands should be washed or hand sanitized before and after mask removal. In and out of popular clinics and wards, strictly follow the requirements of the "Procedures for Medical Staff to Put on and Take Off Protective Equipment", and put on and take off protective equipment correctly.
5. Medical staff should grasp the epidemiological and clinical characteristics of the new coronavirus infection, conduct patient screening in accordance with the diagnosis and treatment standards, and immediately take isolation measures and promptly report suspected or confirmed patients.
6. After the patient is transferred out, carry out the final treatment according to the "Technical Standards for Disinfection of Medical Institutions".
7. Medical institutions should provide masks for patients and accompanying persons and guide them to wear them correctly.
(2) Emergency department.
1. Implement the pre-examination and triage system, guide fever patients to fever clinics, formulate and improve emergency plans for the transfer and rescue of critically ill patients, and strictly implement them.
2. Reasonably set up isolation areas to meet the needs of suspected or confirmed patients to be isolated and treated on the spot.
3. Medical staff strictly implement preventive measures and do a good job in personal protection and management of the diagnosis and treatment environment. When implementing emergency treatments such as tracheal intubation and other high-risk occupational exposure risks, preventive measures should be taken in accordance with the requirements for receiving and treating diagnosed patients.
4. The diagnosis and treatment area should maintain good ventilation and be regularly cleaned and disinfected.
5. Take effective measures such as setting up waiting areas to avoid crowd gathering.
(3) Common wards (rooms).
1. Emergency isolation wards should be set up for the isolation and treatment of suspected or confirmed patients, relevant working systems and procedures should be established, and sufficient disinfection and protective equipment for acute respiratory infections should be prepared.
2. Suspected or confirmed patients are found in the ward (room), relevant emergency plans and work processes are started, and timely and effective isolation, treatment and referral are implemented according to the specifications.
3. Suspected or confirmed patients should be referred to special persons for diagnosis, treatment and care, to limit the access of irrelevant medical personnel, and in principle not to visit; if possible, they can be placed in a negative pressure ward.
4. Non-scheduled hospitals that do not have the conditions for treatment should be promptly transferred to designated hospitals with isolation and treatment capabilities. Waiting for referral to take effective isolation and treatment measures for patients.
5. After the patient is transferred out, the contact environment should be treated according to the "Disinfection Technical Specification for Medical Institutions".
(4) The ward (room) of patients with pneumonia suspected or diagnosed with new coronavirus infection.
1. The building layout and work flow shall comply with the relevant requirements of the "Hospital Isolation Technical Specification" and shall be equipped with medical personnel protective equipment that meets the requirements and is in an appropriate number. Medical institutions with negative pressure wards (rooms) shall implement standardized management in accordance with relevant requirements.
2. Suspected or confirmed patients should be isolated in a timely manner. Suspected patients and confirmed patients should be placed separately; suspected patients should be isolated in a single room, and patients diagnosed with etiology can be placed in the same room.
3. On the basis of implementing standard prevention, take measures such as contact isolation, droplet isolation and air isolation. Specific measures include:
(1) In and out of isolation wards, the "Hospital Isolation Technical Specifications" and "Procedures for Medical Staff to Put on and Take Off Protective Articles" should be strictly implemented, and hand hygiene and put on and take off protective articles should be properly implemented.
(2) The procedure for medical personnel to put on and take off protective equipment should be formulated; a flow chart and a dressing mirror should be made. Personnel equipped with proficiency infection prevention and control technology supervise medical personnel to put on and take off protective equipment to prevent pollution.
(3) Stethoscopes, thermometers, sphygmomanometers and other medical appliances and nursing items used for diagnosis and treatment of suspected or confirmed patients should be used exclusively by individuals. If the conditions are limited and the medical equipment cannot be guaranteed for special use, it should be cleaned and disinfected after each use.
4. Intensive patients should be admitted to the intensive care unit or the ward with the conditions for monitoring and rescue. The intensive care unit or the ward with the conditions for the monitoring and rescue must not be admitted to other patients.
5. Strict visit system, in principle, no escort. If the patient must be visited in a special situation such as a critical condition, the visitor must strictly follow the regulations for personal protection.
6. Carry out air purification in accordance with the "Hospital Air Purification Management Code".
3. Protection of medical personnel
(1) Medical institutions and medical personnel should strengthen the implementation of standard preventive measures, do a good job in ventilation management of diagnosis areas and wards (rooms), strictly implement the requirements of "Hand Hygiene Code for Medical Staff", and wear medical surgical masks / medical protective masks, Wear latex gloves if necessary.
(2) Take protective measures for droplet isolation, contact isolation and air isolation, and implement the following protection according to different situations.
1. When contacting the patient's blood, body fluids, secretions, excreta, vomit and contaminated items: wear clean gloves, wash hands after removing gloves.
2. When it may be splashed by the patient's blood, body fluids, secretions, etc .: wear medical protective masks, goggles, and impervious clothing.
3. When performing operations that may generate aerosols for suspected patients or diagnosed patients (such as tracheal intubation, noninvasive ventilation, tracheotomy, cardiopulmonary resuscitation, manual ventilation before intubation, and bronchoscopy):
(1) Take air isolation measures;
(2) Wear medical protective masks and conduct sealing performance testing;
(3) Eye protection (such as goggles or face shield);
(4) Wear long-sleeved isolation clothing to prevent penetration of body fluids and wear gloves;
(5) The operation should be carried out in a well-ventilated room;
(6) The number of people in the room is limited to the minimum amount of care and support required by the patient.
(3) The protective equipment used by medical personnel shall meet the relevant national standards.
(4) Medical surgical masks, medical protective masks, goggles, isolation clothing and other protective equipment should be promptly replaced when they are contaminated with patient blood, body fluids, secretions, etc.
(5) When using protective equipment correctly, wash your hands before wearing gloves, and wash your hands with flowing water immediately after removing the gloves or isolation suit.
(6) Strictly implement preventive measures against sharps injuries.
(7) The medical devices and appliances used by each patient shall be cleaned and disinfected in accordance with the requirements of the "Technical Standards for Disinfection of Medical Institutions".
Fourth, strengthen patient management
(1) Isolate suspected or confirmed patients in a timely manner, and guide them into the isolation area according to the specified standard route.
(2) Before the patient enters the ward, change the patient's clothes. After the personal items and the changed clothes are sterilized, store them in the designated place and be kept by the medical institution.
(3) Instruct patients to choose and wear masks correctly, and implement cough etiquette and hand hygiene correctly.
(4) Strengthen the management of patients visiting or accompanying staff.
(E) For isolated patients, in principle, their activities are restricted to the isolation wards to reduce the movement and conversion of patients. If it is necessary to leave the isolation ward or the isolation area, corresponding measures should be taken such as wearing medical surgical masks to prevent patients Pollution to other patients and the environment.
(6) When a suspected or confirmed patient is discharged from the hospital or transferred to hospital, he should change his clothes before leaving, and carry out terminal disinfection of the contact environment according to the "Technical Standards for Disinfection of Medical Institutions".
(7) In case of suspected or confirmed death of the patient, the body shall be dealt with in time. The treatment method is: filling all the open channels of the patient's mouth, nose, ears, anus, etc. with 3000mg / L chlorine disinfectant or 0.5% peroxyacetic acid cotton ball or gauze; wrapping the body with a double-layer cloth and loading it into the double-layer body The bag is sent directly to the designated place for ignition by a dedicated vehicle. Personal items used by the patient during hospitalization can be taken home with the patient or family members after disinfection.