Application
●FTTX Solution and quick maintain for FTTH Network.
●Outdoor harsh environment.
Features
●Waterproof level: IP68;
●Compatible with NTSC2310
●Fully compatible with Huawei System connection with FastConnect Harden Adapter;
●Field installation, easily mounted on the field mount optical connector, don't need any specific tools or devices;
●Low insert loss and high return loss;
●High mechanical strength performance;
●PEI material, Acid and alkali resistance, Ultraviolet resistance;
●Outdoor use, 20-year service life.
Step 1: Insert the boot
Step 2: Insert the silicone rubber ring
Step 3: Put on the lockdown cap
Step 4: Put on the cable clip
Step 5: Sequence after installation is as shown above
Step 6: Align the arrow of the quick connector with the indicator window of the main body (yellow at the triangular notch Circled) Insert the quick connector to the limit
Step 7: Push up the cable clip.
Step 8: Screw tight the lockdown cap.
Step 9: Insert the silicone ring into the end of the lockdown cap
Step 10: Tighten the boot, and the assembly is complete
Disassemble from 1 to 6 in the sequence shown in the figure below, and refer to the connector disassembly sequence for quick connectors
