LC Epoxy Connectors Simplex or Duplex, 62.5/125 Multimode 9/125Singlemode 3.0mm 2.0mm 900µm Boots LC UPC LC APC

Technical Information:

  LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber.

Technical information

● Standards requirements: TIA/EIA-604 FOCIS-10 compatible; exceeds TIA/EIA-568-B.3 requirements

● Fiber compatibility: 62.5/125μm OM1, 50/125μm OM2,10Gig 50/125μm laser optimized OM3/OM4 and 9/125μm OS1

● Fiber cable type: 900μm tight-buffered fiber recommended 250μm coated fiber, by using F250BT-C 250 micron fiber build-up tube kit or FO6CB or FO12CB fan-out kit

● Jacketed cable size: 1.6mm – 2.0mm jacketed cable

● Ferrule type: Zirconia ceramic

● Insertion loss: 0.1dB average (multimode and singlemode)

● Return loss: >20dB (multimode), >40dB (singlemode)

Application:

Panduit LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and faceplates.

Advantage:

FOCC LC Fiber Optic Connectors provide a rugged solution for high-density telecommunication rooms, LANs, public networks and fiber-to-the-desk applications. LC simplex and duplex connectors are used for equipment cross-connects or interconnects in backbone, horizontal and work area applications for high-speed data transmissions. The high-density design and 1.25mm ferrules double the port density (compared to SC connectors) to reduce space requirements on racks, enclosures, panels and face plates.

Standard Compliance:

● TIA-568-C.3 performance requirements;
● Telcordia GR-326 end face geometry;
● Telcordia GR-326 service life tests;
● IEC61754-20 and TIA-604-10 intermateability.

Technical Information:

International Authoritative Certification:

Compliance with the international ISO9001, CE, FCC, RoHS standards. FOCC strict implementation of standardized management and control of the design, development, production, installation and service.

Workshop Overviews:

Among the total workshop area of more than 12,000 square meters, dust-free workshop room accupies 500 square meters while dust-proof room occupies 6,500 square meters.

Ordering Information - Fixed Optical Connector: