FOCC's MPO Breakout cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. It is optimized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection and high-density data center applications.
MPO connector comes with multifiber applies to high density in data center or telecommunication systems. It depends on the high precision metal guide pin and the high precision ferrule pin hole to ensure the optical alignment. It's comes with SM,SMLL,MM,MMLL,8F,12F, 24F,regular force spring, high force spring for your choice.
● Features:
► Factory terminated & tested with guaranteed quality.
► Connector A: Corning MTP, Female (No Pins)
►Connector B: LC/UPC
►8 /12/24Fibers
►Cable is 3mm Round to 2mm on the Breakout side
►0.5 Meter Breakout Length (20 Inches)
►Plenum Rated Jacket (OFNP).
● Application:
► Telecom network
► Ethernet network
► Optical communication equipment
● General Connector Specification:
|
Parameter |
Single-mode |
Multi-mode |
|||
|
Basic |
Fiber connector |
FC, SC, LC, ST, MU, MTRJ, MPO |
|||
|
Ferrule End-face |
PC |
UPC |
APC |
UPC |
|
|
Insertion Loss |
≤0.2dB |
≤0.2dB |
≤0.3dB |
≤0.3bB |
|
|
Return Loss |
≥50dB |
≥55dB |
≥60dB |
≥35dB |
|
|
Ceramic Ferrule Specification |
125.5um concentricity deviations: |
127um concentricity deviations:<=3um |
|||
|
Suitable Fiber |
9/125um |
50/125um,62.5/125um |
|||
|
Mechanical |
Exchangeability |
≤0.2dB |
|||
|
Salt Spray |
≤0.1dB |
||||
|
Drop |
≤0.2dB(1.5M, 5 drops) |
||||
|
Vibration |
IL ≤0.2dB(550Hz, 1.5mm) |
||||
|
Repeatability |
≤ 0.1dB(1000 times) |
||||
|
Durability |
> 1000 times |
||||
|
Operating Temperature |
-40℃ ~ +85℃ |
||||
● Test Assured Program:
1 IL test according to IEC 61300-3-4;
2 RL test according to IEC 61300-3-6;
3 Tested with proposed encircled flux launch condition on 50μm fiber & 850nm per IEC 61280-4-1.
4 0.35 dB Ultra Low IL Connector-MPO connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure a max. 0.35 dB and typical lower than 0.15 dB IL.
5 0.2 dB Low Insertion Loss LC Connector-Utilizing tightly toleranced ceramic ferrules to ensure consistent low loss and ease of assembly, offering great performance with very high repeatability.
● Recommended buffer fiber and color-coded connectors:
|
Cable Type |
Single-mode MTP® Elite® |
Single-mode MTP® Standard |
Multimode MTP® Elite® |
Multimode MTP® Standard |
|
Bare Ribbon |
Mustard Color |
Green Color |
Aqua Color |
Beige Color |
|
Flat ribbon Cordage |
||||
|
Cable Ø 2.0mm |
||||
|
Cable Ø 3.0mm |
||||
|
Cable Ø 3.6mm |
||||
|
Cable Ø 4.5mm |
||||
|
Cable Ø 5.0mm |
||||
|
Cable Ø 5.5mm |
● Products Scheme & Interconnect Solutions:
● MTP® Temperature Cycling at 1550 nm:
● High Density MTP® / MPO Cabling System In Dada Center:
Our Advantages:
Quality Certification--Passed many quality system verification, like ISO, CE, RoHS and EIA/TIA;
Large Stock--Large stock of cables for same-day shipping;
Rigorous Testing Standards--Every cable is tested individually in our test center;
FOCC's Lifetime Warranty--With a lifetime warranty on all cables, a 1-3 year warranty on devices, and a Lifetime Guarantee against defects in workmanship on all custom products, you can be sure your investment is protected;
