Technical Information:
1 input and 8 output fibers with an even split ratio, SC/UPC, 2.0mm or 3.0mm diameter fiber
FOCC PLC (Planar Lightwave Circuit) splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. FOCC Photonics provides a various of 1×N and 2×N PLC splitters, including 1×2 to 1×64 and 2×2 to 2×64 ABS Box type fiber PLC splitters. They are all with superior optical performance, high stability and high reliability to meet various application requirements.
The 1x8 ABS Box PLC Splitter with compact structure and small volume, is easily placed in the case body, such as cable transfer box, wiring in corridor, distribution box, or joint closure with some space reserved.
FOCC 1×8 Fiber PLC Splitter with Plastic ABS Box Package supports G.657A Fiber, 900μm, 2.0mm, 3.0mm input and output fiber, and SC, LC, FC & ST connectors for choice.
|
Features: ● Configuration Type: 1×8, SC/UPC connector; |
Application: ● PON Networks |
Mechanical Dimension(mm):
Introduction:
● 1x2, 1x4, 1x8, 1x16, 1x32, 1x64 splits
● 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 splits
● Unconnectorized
● Fiber jacketing outside boxes 2mm and up to 3mm
● ABS box type or inside metal box/module cassette type
● SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC connector options
● Custom connector configurations and combinations
Product Advantage Details:
(1) High Environmental Stability
● Low insertion loss, low polarization dependent loss, low back reflection, and good uniformity;
(2) Excellent Quality Chips
● Loss of light is not sensitive for wavelength, and it can meet the transmission needs of different wavelengths;
(3) Compact Structure
● Small size, it can be directly installed in a variety of transfer box and just take up little space;
(4) Exquisite Packaging
● The design and packaging is exquisite to ensure the product in good condition.
Specification:
Table 1 – 1×N PLC Splitter
| Fiber length | 1m or custom length | |||||
| Connector Type | Custom specified | |||||
| Optical Fiber Type | Corning SMF-28e fiber, G657A1 or as customized | |||||
| Directivity (dB) Min * | 55 | |||||
| Return Loss (dB) Min * | 55 (50) | |||||
| Power Handling (mW) | 300 | |||||
| Operating Wavelength (nm) | 1260 ~ 1650 | |||||
| Operating Temperature(°C) | -40~ +85 | |||||
| Storage Temperature(°C) | -40~ +85 | |||||
| Port Configuration | 1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 |
| Insertion Loss(dB) Typical | 3.6 | 7.1 | 10.2 | 13.5 | 16.5 | 20.5 |
| Insertion Loss (dB) Max | 4.0 | 7.3 | 10.5 | 13.7 | 16.9 | 21.0 |
| Loss Uniformity (dB) | 0.6 | 0.6 | 0.8 | 1.2 | 1.5 | 2 |
| PDL(dB) | 0.2 | 0.2 | 0.2 | 0.25 | 0.3 | 0.35 |
| Wavelength Dependent Loss(dB) | 0.3 | 0.3 | 0.3 | 0.5 | 0.5 | 0.5 |
| Temp. Dependent Loss (-40~85 ) (dB) | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.5 |
| Port Configuration | 2X2 | 2X4 | 2X8 | 2X16 | 2X32 | 2X64 |
| Insertion Loss(dB) Typical | 3.8 | 7.4 | 10.8 | 14.2 | 17 | 21 |
| Insertion Loss (dB) Max | 4.2 | 7.8 | 11.2 | 14.6 | 17.5 | 21.5 |
| Loss Uniformity (dB) | 1 | 1.4 | 1.5 | 2 | 2.5 | 2.5 |
| PDL (dB) | 0.2 | 0.2 | 0.4 | 0.4 | 0.4 | 0.5 |
| Wavelength Dependent Loss(dB) | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 |
| Temp. Dependent Loss(-40~+85°C) | 0.5 | 0.5 | 0.5 | 0.8 | 0.8 | 1 |
PLC More Family Products:
Our advantage:
FOCC provides dedicated service from one to one from the beginning of the order, and provides strong technical team support to provide satisfactory answers for your connector solutions. We guarantee that the quality of all products is high-quality products, and we promise to replace all of them for free if quality problems occur.
Hot Tags: 1x8 PLC fiber splitter singlemode g657a ABS box splitter splice/pigtailed ABS module, 2.0mm 3.0mm SC/UPC connector, China, factory, suppliers, manufacturers, quotation, customized, price, buy
