24 Fiber MTP Female OM4 Loopback Cable For Transceiver And Port Testing

Welcome to buy the 24 fiber mtp female om4 loopback cable for transceiver and port testing with our factory. As one of the leading manufacturers and suppliers in China, we also welcome the customized orders. Consult the price and the quotation with us now.

Key Features

Why Choose a 24 Fiber MTP Female OM4 Loopback Cable?

1. Unmatched Density for Modern High-Speed Networks

A single 24-fiber MTP loopback replaces up to 12 duplex LC loopback adapters, reducing test setup time by 85% and minimizing cable clutter in high-density switch environments. This is critical for testing 200G/400G transceivers that utilize 24-fiber parallel optical interfaces.

2. Precision Female Connector Design

Our unpinned (female) MTP connectors are specifically engineered to mate with the pinned (male) interfaces found in virtually all optical transceivers and network equipment ports. This eliminates gender mismatch issues and ensures consistent mechanical alignment through thousands of insertion cycles-an essential requirement for production line and burn-in testing environments.

3. Optimized for OM4 High-Speed Performance

Manufactured with laser-optimized OM4 multimode fiber, this loopback cable supports the full bandwidth capabilities of 850nm VCSEL-based transceivers. It delivers stable insertion loss and return loss characteristics that accurately simulate real-world fiber links, preventing false test results that can occur with inferior loopback products.

4. Rigorous Factory Testing

Every FOCC MTP loopback cable undergoes comprehensive testing before shipment, including:

• 100% connector end-face inspection (3D interferometry)
• Individual channel insertion loss testing at 850nm and 1300nm
• Fiber mapping and polarity verification
• Mechanical durability testing (100+ insertion cycles)

Product Specifications

Typical Applications

Optical Transceiver Testing

This loopback cable is used to verify the transmit and receive functions of optical transceivers. It allows engineers to confirm signal output, receiver response, module alarm status, and port stability during testing.

Switch Port Diagnostics

In high-density switches and routers, port-level problems can be difficult to isolate. A 24 fiber MTP loopback cable provides a fast and repeatable way to check whether the equipment port is functioning correctly.

Data Center Pre-Deployment Testing

Before deploying optical links in a live data center environment, engineers can use MTP loopback cables to test port readiness and reduce the risk of installation errors.

Production Line and Burn-In Testing

For optical module manufacturers and network equipment suppliers, loopback cables are commonly used in batch testing, burn-in testing, and quality control procedures.

Laboratory and R&D Testing

The compact structure makes this product useful for laboratories, engineering validation, and test bench environments where repeated optical signal verification is required.

Product Structure & Customization

Each FOCC 24-fiber MTP OM4 loopback cable is precision-assembled using:

• High-quality MTP/MPO connector components
• Bend-insensitive OM4 multimode fiber
• Precision internal loopback fiber routing
• Durable protective housing and boot structure
• Dust cap for connector protection when not in use

Quality Assurance

At FOCC, quality is our top priority. Every MTP/MPO loopback cable we manufacture undergoes a rigorous 7-step quality control process:

1. Raw Material Inspection: All components are verified to meet industry standards
2. Precision Assembly: Trained technicians assemble each cable in a cleanroom environment
3. Connector Polishing: Automated polishing ensures consistent end-face quality
4. 3D End-Face Inspection: Every connector is inspected for scratches, pits, and geometry
5. Optical Performance Testing: 100% insertion loss and return loss testing
6. Channel Mapping Verification: Ensures correct TX/RX loopback configuration
7. Final Visual Inspection: Checks for cosmetic defects and proper labeling

All our products comply with international standards including TIA/EIA-568, IEC 61754, and RoHS. We provide comprehensive test reports for all batch orders upon request.

FAQ

What is a 24 Fiber MTP Female OM4 Loopback Cable used for?

It is used for optical transceiver testing, switch port diagnostics, equipment burn-in testing, and high-density fiber optic port verification.

Is this the same as a standard MTP patch cable?

No. A standard MTP patch cable is used for fiber link connection, while an MTP loopback cable is used for testing and diagnostics. It routes transmit signals back to receive channels for port verification.

What does MTP Female mean?

MTP Female means the connector does not have guide pins. It is designed to mate with a male MTP/MPO connector that has guide pins.

Why use OM4 fiber?

OM4 multimode fiber is suitable for high-speed short-reach optical testing, especially in 850nm multimode transceiver applications commonly used in data centers.

Can FOCC customize the loopback mapping?

Yes. FOCC can customize the internal fiber mapping according to the customer's optical module, test platform, or equipment port requirement.

Can this product be supplied with test reports?

Yes. FOCC can provide insertion loss test reports, channel mapping verification, and customized labeling for batch orders.