● Cisco GLC-BX-D80 Compatible 1000BASE-BXD SFP SMF 1550/1490nm 80km:
FOCC offer a comprehensive range of fibre and copper SFP (Small Form-factor Pluggable) transceivers for use in telecom and data communication networks. SFP's interface the electrical communication device to the physical cabling medium and are available in Ethernet or Fibre Channel and support data rates up to 1.25 Gbps (Ethernet). FOCC SFP's include Digital Diagnostics Monitoring (DDM) which allows monitoring of parameters such as power, temperature and voltage.
● Main Features:
► SFP (mini-GBIC) transceiver module ( equivalent to: Cisco FOCC-BX-D-80 );
► Gigabit Ethernet;
► 1000Base-BX;
► LC single mode up to 49.7 miles;
► 1550 (TX) / 1490 (RX) nm.
This FOCC Cisco GLC-BX-D-80 compatible SFP transceiver provides 1000Base-BX throughput up to 80km over single-mode fiber (SMF) at a bidirectional wavelength of 1550nmTx and 1490nmRx using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.
● Description:
| Form Factor | Plug-in module |
Compatibility | Cisco Compatible |
Distance | 80km |
Max Data Rate | 1000Mbps |
Wavelength | 1550 (TX) / 1490 (RX) nm |
Cabling Type | Ethernet 1000Base-BX |
Interface | LC single mode |
Data Link Protocol | Gigabit Ethernet |
DOM Support | Yes |
Cable Type | SMF |
Type | SFP (mini-GBIC) transceiver module |
Receiver Sensitivity | < -17dBm |
HS Code | Optical fibre cables-85447000.00 |
● Optical characteristics transceiver:
| Parameters | Symbols | Min | Typ | Max | Unit |
40km | |||||
Centre Wavelength BXD | λC | 1320 | 1330 | 1340 | nm |
Centre Wavelength BXU | λC | 1260 | 1270 | 1280 | nm |
Spectral Width (RMS) | σ |
|
| 1 | nm |
Average Output Power | P0ut | -3 |
| +2 | dBm |
Extinction Ratio | EX | 3.5 | 6 |
| dB |
● Mechanical Specifications:
● Optical characteristics receiver:
| Parameters | Symbols | Min | Typ | Max | Unit |
20km | |||||
Centre Wavelength BXD | λC | 1260 | 1270 | 1280 | nm |
Centre Wavelength BXU | λC | 1320 | 1330 | 1340 | nm |
Reveiver Sensitivity | Sen | -14.5 |
|
| dBm |
Maximum input | Pmax | 0 |
|
| dBm |
LOS De-Assert | LOSd |
|
| -14 | dBm |
LOS Assert | LOSa | -25 |
|
| dBm |
LOS Hysteresis | LOSh | 0.5 |
| 4 | dBm |
40km | |||||
Centre Wavelength BXD | λC | 1260 | 1270 | 1280 | nm |
Centre Wavelength BXU | λC | 1320 | 1330 | 1340 | nm |
Reveiver Sensitivity | Sen | -16 |
|
| dBm |
Maximum input | Pmax | 0 |
|
| dBm |
LOS De-Assert | LOSd |
|
| -17 | dBm |
LOS Assert | LOSa | -27 |
|
| dBm |
LOS Hysteresis | LOSh | 0.5 |
| 4 | dBm |
60km | |||||
Centre Wavelength BXD | λC | 1260 | 1270 | 1280 | nm |
Centre Wavelength BXU | λC | 1320 | 1330 | 1340 | nm |
Reveiver Sensitivity | Sen | -22 |
|
| dBm |
Maximum input | Pmax | -7 |
|
| dBm |
LOS De-Assert | LOSd |
|
| -23 | dBm |
LOS Assert | LOSa | -33 |
|
| dBm |
LOS Hysteresis | LOSh | 0.5 |
| 4 | dBm |
80km | |||||
Centre Wavelength BXD | λC | 1480 | 1490 | 1500 | nm |
Centre Wavelength BXU | λC | 1530 | 1570 | 1580 | nm |
Reveiver Sensitivity | Sen | -22 |
| -7 | dBm |
Maximum input | Pmax | -7 |
|
| dBm |
LOS De-Assert | LOSd |
|
| -24 | dBm |
LOS Assert | LOSa | -34 |
|
| dBm |
LOS Hysteresis | LOSh | 0.5 |
|
| dBm |
Dispersion penalty |
|
|
| 3.0 | dBm |
● Electrical characteristics:
| Parameters | Symbols | Min | Typ | Max | Unit | Remarks |
Supply Voltage | Vcc | 3.14 | 3.3 | 3.46 | V |
|
Supply Current 20km | Icc |
| 270 | 350 | mA |
|
Supply Current 40km |
|
| 300 | 450 | mA |
|
Supply Current 60km |
|
| 300 | 450 | mA |
|
Supply Current 80km |
|
|
| 500 | mA |
|
| ||||||
Supply Voltage | Vcc | 3.14 | 3.3 | 3.46 | V |
|
Supply Current | Icc |
|
| 300 | mA |
|
Reference Differential Input | Zd |
| 100 |
| mA |
|
Input AC Common Mode Input |
| 0 | 25 |
| mA |
|
Differential Input Voltage Swing | VID | 150 |
| 900 | mA |
|
Total Jitter |
|
|
|
|
|
|
Data Dependant Jitter |
|
|
|
|
|
|
Uncorrelated Jitter |
|
|
|
|
|
|
Eye Mask | See SFP+ MSA | X1 |
|
|
| UI |
Eye Mask | See SFP+ MSA | X2 |
|
| 0.35 | UI |
● Quality Certification:
Quality and standards are the foundation of FOCC. We are dedicated to providing customers with outstanding, standards-compliant products and services. FOCC has passed many quality system Certifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service. Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
● Lifetime Warranty:
All the fiber optic products in FOCC are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
