Customized LC/SC/FC/ST/E2000/MU/MTRJ Duplex

9/125 Single Mode Bend Insensitive Fiber Patch Cable

PRODUCT DESCRIPTION

FEATURES

v Bend insensitive cables enable tight bend radii and routing to minimize signal loss due to high traffic and/or densely packed patch panel routing installations.

LC/SC/FC/ST/E2000/MU/MTRJ 9/125 OS2 Duplex Single Mode Bend Insensitive Fiber Optic Patch Cable
Bend Insensitive Fiber Optic Cable is less attenuation when bend or twisted compared with traditional fiber cables and this will make the installation and maintenance of the fiber optic cables more efficient. It also can save more space for your high density cabling in data centers and other enterprise networks.

Technical Information

Technical drawings

Bend Insensitive Fiber Optic Cables

Advantages

Compared to the normal fiber, bend-insensitive fiber has absolute predominance. In buildings, it allows fiber to be run inside molding around the ceiling or floor and around doors or windows without inducing high losses. It is also insurance against problems caused by careless installation. In patch panels, it should not suffer from bending losses where the cables are tightly bent around the racks. BI fibers are also available in 50/125 MM (OM3 and OM4) and SM versions. Considering the advantages of BI fiber and the small incremental cost to manufacture it, some manufacturers have decided to make all their 50/125 MM fiber bend-insensitive fiber.

Why You Should Use Bend-Insensitive Fiber Optic Patch Cord

the traditional fiber optic patch cord and the bend-insensitive fiber optic patch cord.

Traditional fiber optic patch cord has limited bend radius before it will affect the single (macro bend). Bend-insensitive fiber patch cord has a much smaller bend radius, as much as 10-15 times smaller than that of the traditional.

This is a huge benefit for Data Centers and Fiber to the Home (FTTH) installations, since we can now run the fiber patch cord in server racks or sharp corners, especially in private residences. This will eliminate macro bend’s critical impact Internet signal, causing it to slow down or have no connection at all, which is the worst thing that can happen.

Multi Mode Fiber patch cords’ bend insensitive version is called (BIMMF) Bend-Insensitive Multi Mode Fiber.

Single Mode Fiber patch cord version is called ITU G.657.

Bend-Insensitive Fiber does not only come in patch cord, but is also popularly used for riser or trunk cable, outdoor aerial, and underground cable.

The greatest benefit of Bend-Insensitive fiber optic compared to the older generation of fiber optic standard is it has been proven to have no impact in fiber loss – not even a single loss.

So, when preparing for fiber optic installation, it’s best to use Bend-Insensitive Fiber Optic Patch Cord.

Connector

Various grade B connectors and standard connectors are available - LC/SC/ST/FC/E2000/MU/MTRJ, UPC/APC polish.

Customized Jacket Material and Cable Diameter