Switchable Fiber Patch Cable 10 Gig Multimode 50/125 OM3 Uniboot Duplex Pull/Push with LC-LC Connectors
These high-speed switchable 10 gig multimode 50/125µm uniboot fiber optic patch cables are terminated with LC fiber optic connectors on both ends (LC-LC). Called Lucent Connectors, Little Connectors, or Local Connectors, these snap-in connectors are typically used for high-density connections and are compatible with plug-and-play devices such as SFP modules and XFP transceivers.
Our extensive range of fiber patch cables are terminated with state-of-the-art connectors, which are available in any combination of ST, SC, FC, and LC with PC, UPC or APC polish types to meet your standard or custom configurations. Our fiber jumpers have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.
PRODUCT DESCRIPTION
FEATURES
Simplex or duplex or multi fiber assemblies
Riser or Plenum rated, LSZH and cables available
Low insertion loss, IEC, TIA/EIA, Telcordia compliant
Custom fiber optic cable lengths and jacket colors
Various fiber types and wavelengths, typical 9/125 single mode, 50/125 multimode and 62.5/125 multimode
0.9 / 1.8 / 2.0 / 3.0 / mm outer diameter fiber optic cables
PC, UPC, and APC polish types
Good packing, competitive prices and very fast delivery
100% geometry test anc IEC cleaning test are available
OEM service is avaibable
Switchable Uniboot LC-LC, Bend Insensitive Fiber Patch Cable
The Switchable uniboot cable is a unique design that allows to switch polarity without using any tools. It is commonly used in data centers where cable counts are high and space limited.
| Fiber Connector: | LC/UPC-LC/UPC | Fiber Type: | OS2 9/125μm |
|---|---|---|---|
| Fiber Jacket: | 3.0mm, PVC | Fiber Counts: | 2 Fibers |
| Insertion Loss: | ≤0.2dB | Return Loss: | ≥50dB |
| Pull-out Force: | 100N | Durability: | 500 Cycles |
| Operating Temperature: | -40 To + 85°C | Fiber Grade: | G. 657. A1(Compatible With G. 652. D) |
LC UPC to LC UPC Uniboot Duplex OS2 Single Mode PVC (OFNR) 3.0mm Fiber Optic Patch Cable
The LC-LC Uniboot connector allows two fibers to be carried through a 3.0mm single jacket, used in high-density fiber patching in data centers which need space saving and reduce cable management troubles.
Niafiber Fiber Patch Cord consists of a single-mode or multi-mode fiber cord and two connectors, one at each end.It is available in both Single mode and multimode versions,come with a zirconia ceramic ferrule with pre-polished UPC or APC.
Additional Information
Your patch cable selection is important to the type of fiber optic network you are working on. Some are ideal for single mode, while others might be the right for a Multimode installation. Another factor to consider is polish type when using single mode cables.
While you patch cable choice is important, it is only one piece of the fiber optic network to choose from. Take a look at what's available in these other key product categories:
- fiber optic enclosures
- fiber channel testers
- splice trays
- fiber optic accessories
Connector Type Abbreviations:
SC - a snap-in style connector. Known for its excellent performance. Referred to as Subscriber Connectors, Square Connectors or Standard Connectors.
ST - a very popular choice connector for Multimode networks. Also referred to as Straight Tip connectors, they utilize a bayonet-style coupling type, enabling a simple twist-on and twist-off installation.
FC - was at one time the most popular single mode connector type, but is now typically being replaced by SC and LC connectors. Also known as Ferrule Connectors, they utilize a screw-on coupling type to be used in high-vibration environments and are commonly used for datacom, telecom, measurement equipment and single-mode lasers.
LC - a small form factor connector—measuring half the size of an SC connector. This is a popular choice for single mode cables. Also referred to as Lucent Connectors, Little Connectors or Local Connectors, these snap-in connectors are typically used for high density connections and are compatible with plug-and-play devices such as SFP modules and XFP transceivers.