High Quality 10G OM3 50/125 Duplex Simplex 12Core 24Core Fiber Optic Patch Cord LC SC FC ST MPO MU DIN D4 Optical Fiber Patch Cord

FC Connector. 

FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.

SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull motion and is keyed.

LC patch cord is a fiber optic cable used to attach one device to another for signal routing. LC stands for Lucent Connector. It is a small form-factor fiber optic connector, half the size of the SC..

ST stands for Straight Tip- a quick release bayonet style connector. ST connectors are cylindrical with twist lock coupling. They are push-in and twist types

PC Polishing type

PC stands for Physical Contact. With the PC connector, the two fibers meet as they do with the flat connector, but the end faces are polished to be slightly curved or spherical. This eliminates the air gap and forces the fibers into contact

UPC stands for Ultra Physical Contact. The end faces are given an extended polishing for a better surface finish. These connectors are often used in digital, CATV, and telephony systems.

APC stands for Angled Physical Contact The end faces are still curved, but they’re angled at an industry-standard eight degrees. This maintains a tight connection. These connectors are preferred for CATV and analogue systems.

Eco-Friendly Packaging & Labeling

This easy to take and well-protected fiber optical cable package has been labeled and marked by FOCC as default. Customized label or package solution are available on request.

Questions & Answers

Question:

What is the polarity type of the switchable uniboot cable? Is it straight-through or cross?

Answer:

The default polarity type is straight-through A-B type, but we can also offer cross A-A type.

Question:

Does this switchable uniboot cable use corning glass or others? What is the minimum bend radius?

Answer:

Yes, this patch cord uses corning glass. The minimum bend radius for single mode fiber cables is 10mm, for multimode fiber cables it is 7.5mm.

Question:

Do you provide switchable uniboot cable with push pull Tab? 

Answer:

Sorry, we don't. Because the fiber cable with push pull Tab cannot switch the polarity. But if you need, you can buy the push pull uniboot cable