Description
Technical Parameters
FOCC G652 G655 G657 0.9mm ST SM/MM Simplex 12core 12color Optical Fiber Pigtail
Fiber Optic 12 color cable 0.9mm with LC Connector Singlemode Pigtail 1meter
Pigtails are used in permanent connections between fiber patch panels and incoming cables / single blown fibers.
Our offers a wide range of pigtails, designed and manufactured for demanding network applications. It comprises of multimode and singlemode. Pigtails are pre-constructed with connectors. Connector options include small form factors such as LC, MU as well as SC, FC and ST. These are based on 900μm tight buffer cores and suitable for internal use only inside suitable Fiber Management Systems.
Features
. Constructed from high quality connectors and standard fibers
. Wide range of connector and fibre options available
. Tight Buffer 900µm buffer internal construction as standard
. Custom lengths, connector combinations and polishes are available.
. Other cable diameters and fibre types available on request
Specifications
. Constructed from high quality connectors and standard fibers
. Wide range of connector and fibre options available
. Tight Buffer 900µm buffer internal construction as standard
. Custom lengths, connector combinations and polishes are available.
. Other cable diameters and fibre types available on request
Specifications
| Connector Type | SC, LC, FC, ST, MU |
| Fiber Type | G652D, G657A, OM1, OM2, OM3, OM4 |
| Polish or Ferrule Interface Type | PC, UPC, APC |
| Jacket Material | PVC or LSZH |
| Cable Diameter | 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm |
| Jacket Color (Multimode: OM1 & OM2) | Orange |
| Jacket Color (Multimode: OM3) | Aqua |
| Jacket Color (Multimode: OM4) | Aqua or violet |
| Jacket Color (SingleMode: G652D & G657A) | Yellow |
| Insertion Loss (dB) Max. | ≤0.3 |
| Return Loss (dB) Singlemode | PC≥45, UPC≥50, APC≥60 |
| Return Loss (dB) Multimode | PC≥35dB |
| Note:Other Jacket colors may be available upon request. | |
use of pigtails
1. the pigtail avoids the loop as much as possible during use, which can reduce the attenuation of the optical signal during transmission.
2. the optical module connected to the pigtail must be matched with the pigtail fiber. the shortwave optical module must be connected to the multimode pigtail. the longwave optical module must be connected to the singlemode jumper to ensure the accuracy of data transmission.
3. the pigtail connector should be kept clean. after use, the connector should be protected and sealed with a protective sleeve to prevent oil, dust and mechanical damage.
4 before use, the tail fiber ceramic ferrule and the ferrule end face cotton must be wiped clean with alcohol.
5. when there is damage to the pigtail caused by man-made or other factors, replace the damaged jumper in time.
